View page
Talk page

DBBC2/FiLA10G system setup

Modified 17:01, 24 Jan 2017 by rottmann | Page History
    Table of contents
    1. 1. Pre-Checks
    2. 2. Startup

    Version as of 12:28, 20 May 2024

    to this version.

    Return to Version archive.

    View current version

    Pre-Checks

    • Check that the 1pps is connected
    • Check that the 10MHz is connected
    • Check that the IFs are connected (see )
    • Check that the serial cable is connected to the FiLA10G box
    • Check that the USB cable is NOT connected to the FiLA10G box
    • Check that all 3 VSI cables are connected to the FiLA10G box
    • Check that the VSI cable is connected to the Mark5 recorder

    Startup

    • power on the electronics (EL switch)
    • power on the PC (PC swich)