Table of contents
- 1. Enable autoFTP from the Field System
- 1.1.1.1.1. Install NCFTP on the recorder machine
- 1.1.1.1.2. Enable autoftp in the Field System configuration
- 1.1.1.1.3. Install autoftp script
- 1.1.1.1.4. Test FTP transfer
Enable autoFTP from the Field System
Install NCFTP on the recorder machine
Log into the Mark5 machine as user root
apt-get install ncftp
Enable autoftp in the Field System configuration
On the Field System computer (as user prog)
cd /usr2/control
edit sked.ctl and make sure that it contains the following uncommented line
AutoFTP ON
optionally you can also uncomment the disk2file_Dir directive to specify a special path under which the
extracted file gets stored. This path must exist on the Mark5 recorder!
e.g.:
disk2file_Dir /data
