FS: Enable AutoFTP

Install NCFTP on the recorder machine

Log into the Mark5 machine as user root

apt-get install ncftp

Enable autoftp in the Field System configuration

On the Field System computer  (as user prog) go to /usr2/control

edit sked.ctl and make sure that it contains the following uncommented line

AutoFTP ON

optionally you can also uncomment the disk2file_Dir directive to specify a special path under which the
extracted file gets stored. This path must exist on the Mark5 recorder! If you leave this line commented out the files get stored in /home/oper by default.

e.g.:

disk2file_Dir /data

Install autoftp script

On the Field System computer  (as user prog) go to /usr2/st/autoftp

If the script does not exist you can download it here.

Edit the autoftp perl script and change the contents of the following variables:

$mark5_node="XXX.XXX.XXX.XXX";   
$mark5_user="oper";
$dest="ftp.mpifr-bonn.mpg.de";
$dest_user="anonymous";
$dest_pass="evlbi\@mpifr.de";
$dest_dir="/incoming/geodesy";

Replace XXX.XXX.XXX.XXX with the IP adress of your Mark5 recorder

Then run:

make

Allow passwordless login from Field System computer to Mark5 recorder

Try to log-in from the Field System machine to the Mark5 recorder as user oper. If prompted for a password do the following:

on the Field System computer go to /home/oper/.ssh

a) If  a public key exists (typically named id_rsa.pub) copy it to the Mark5 recorder

scp id_rsa.pub oper@MARK5B:/home/oper/.ssh

log-into the mark5 recorder as user oper an go to /home/oper/.ssh

cat id_rsa.pub >> authorized_keys

b) if no public key exists

on the Field System machine as user oper:

ssh-keygen

use default ouput path, don't use passphrase.

Then follow instructions described under a)