GMVA Setups

    Standard Mode (4Gbps, DDC, dual-pol)

    Starting from Oct 2019 the GMVA will record at 4Gbps.

    86012 - 86524 MHz  (512 MHz, dual-polarization)

    For the DiFX Zoom band setup see the Correlator_Cookbook, A1: GMVA_correlation

    VLBA & GBT

    RDBE DDC mode with 4x128 MHz bands, dual-pol

    sky  start [MHz] sky  stop [MHz] bandwidth [MHz] Sideband
    86012 86140 128 USB
    86140 86268 128 USB
    86268 86396 128 USB
    86396 86524 128 USB

    Freq / Bitstream setup:

     chan_def = : 86012.00 MHz : U : 128.00 MHz : &CH01 : &BBC01 : &NoCal; *Rcp
     chan_def = : 86012.00 MHz : U : 128.00 MHz : &CH02 : &BBC02 : &NoCal; *Lcp
     chan_def = : 86140.00 MHz : U : 128.00 MHz : &CH03 : &BBC03 : &NoCal; *Rcp
     chan_def = : 86140.00 MHz : U : 128.00 MHz : &CH04 : &BBC04 : &NoCal; *Lcp
     chan_def = : 86268.00 MHz : U : 128.00 MHz : &CH05 : &BBC05 : &NoCal; *Rcp
     chan_def = : 86268.00 MHz : U : 128.00 MHz : &CH06 : &BBC06 : &NoCal; *Lcp
     chan_def = : 86396.00 MHz : U : 128.00 MHz : &CH07 : &BBC07 : &NoCal; *Rcp
     chan_def = : 86396.00 MHz : U : 128.00 MHz : &CH08 : &BBC08 : &NoCal; *Lcp
    

    DBBC2 Stations (Eb,On,Ys,Mh)

    All DBBC2 stations should use:

    • DDC mode (firmware 107 beta3)
    • LO=85500
    • 2nd Nyquist zone: 512 -1024 MHz
    • Use 2 Core-boards

    Bitstream setup:

    Note: Use astro if IFs are connected to Boards A+B, use astro2 if IFs are connected to boards A+C

    • On,Ef:     dbbcform=astro
    • Ys,Mh:    dbbcform=astro2

     

    bbc freq sideband bandwidth sky start [MHz] sky stop
    960 USB 64 86460 86524
    LSB 64 86460 86396
    832 USB 64 86332 86396
    LSB 64 86332 86268
    704 USB 64 86204 86268
    LSB 64 86204 86140
    576 USB 64 86076 86140
    LSB 64 86076 86012

    DBBC3 Stations (Pv)

    All DBBC3 stations:

    • DDC_U mode (firmware V126)

    PV setup:

    • 1st LO=92100 (dictated by the DBBC2 IF requirements)
    • 2nd LO= 9048 (DBBC3 GComo)
      • Use E90LI IFs (4-9GHz LSB)
      • Baseband: 0-4 GHz USB => 83052 - 87052 sky freq

    Bitstream order (fixed for DDC_U mode):

    • BBC1-USB, BBC1-LSB, BBC2-USB, BBC2-LSB, ...

    Observations can be done with 128MHz or 64 MHz subbands (see tables below)

    BBC setup  (DDC_U with 64MHz bands):

    bbc freq net sideband bandwidth sky start sky stop
    3024 LSB 64 86012 86076
    USB 64 86076 86140
    3152 LSB 64 86140 86204
    USB 64 86204 86268
    3280 LSB 64 86268 86332
    USB 64 86332 86396
    3408 LSB 64 86396 86460
    USB 64 86460 86524

    BBC setup  (DDC_U with 128MHz bands):

    bbc freq net sideband bandwidth sky start sky stop
    3088.0 LSB 128 86012 86140
    USB 128 86140 86268
    3344.0 LSB 128 86268 86396
    USB 128 86396 86524

    Bandpass shapes @64and 128 MHz

    64 MHz 128 MHz
    DBBC3_64MHz.png DBBC3_128MHz.png

    R2DBE Stations (GLT, LMT, Haystack)

    • R2DBE stations must manually setup their systems (no vex/drudg support)
    • IF setup is flexible as long as the 2GHz band includes the 86012 - 86524 MHz sub-band
    • Desired tuning would yield: 85244 - 87292 USB or LSB.

    KVN

    • Bistream order: ?
    sideband bandwidth sky start [MHz] sky stop
    USB 64 86460 86524
    LSB 64 86460 86396
    USB 64 86332 86396
    LSB 64 86332 86268
    USB 64 86204 86268
    LSB 64 86204 86140
    USB 64 86076 86140
    LSB 64 86076 86012

    ALMA

    ALMA will record a band of 1.875 GHz subdivided into 62.5MHz wide sub-bands. An LO offset should be avoided. During GMVA 2021, (2022), and 2023 there is a +3 MHz LO offset not accounted for by the nominal tuning given below. The ALMA center frequency is  86271.0 MHz.

    From 2024 onwards, ALMA ought to have a long-planned software fix in place (per email info from 2023) that avoids the large LO offset. The ALMA center frequency for 2024 and onwards is 86268.0 MHz.

    The total recorded data rate for GMVA "4 Gbps" is 62.5 MHz * 2-bit/sample * 2 * 2 pol * 32 channels = 16 Gbps.

    Channel definitions *with* 3 MHz offset:

    def FREQ_AA;
      ** datastream 1:
      ** alma-vex-defs.py -f 86271.000 -ralma -s L -n W -o  0 -b 07
      chan_def = &W : 87210.453125 MHz : L : 62.5 MHz : &CH01 : &BBC07 : &cp;
      chan_def = &W : 87151.859375 MHz : L : 62.5 MHz : &CH02 : &BBC07 : &cp;
      chan_def = &W : 87093.265625 MHz : L : 62.5 MHz : &CH03 : &BBC07 : &cp;
      chan_def = &W : 87034.671875 MHz : L : 62.5 MHz : &CH04 : &BBC07 : &cp;
      chan_def = &W : 86976.078125 MHz : L : 62.5 MHz : &CH05 : &BBC07 : &cp;
      chan_def = &W : 86917.484375 MHz : L : 62.5 MHz : &CH06 : &BBC07 : &cp;
      chan_def = &W : 86858.890625 MHz : L : 62.5 MHz : &CH07 : &BBC07 : &cp;
      chan_def = &W : 86800.296875 MHz : L : 62.5 MHz : &CH08 : &BBC07 : &cp;
      chan_def = &W : 86741.703125 MHz : L : 62.5 MHz : &CH09 : &BBC07 : &cp;
      chan_def = &W : 86683.109375 MHz : L : 62.5 MHz : &CH10 : &BBC07 : &cp;
      chan_def = &W : 86624.515625 MHz : L : 62.5 MHz : &CH11 : &BBC07 : &cp;
      chan_def = &W : 86565.921875 MHz : L : 62.5 MHz : &CH12 : &BBC07 : &cp;
      chan_def = &W : 86507.328125 MHz : L : 62.5 MHz : &CH13 : &BBC07 : &cp;
      chan_def = &W : 86448.734375 MHz : L : 62.5 MHz : &CH14 : &BBC07 : &cp;
      chan_def = &W : 86390.140625 MHz : L : 62.5 MHz : &CH15 : &BBC07 : &cp;
      chan_def = &W : 86331.546875 MHz : L : 62.5 MHz : &CH16 : &BBC07 : &cp;
      chan_def = &W : 86272.953125 MHz : L : 62.5 MHz : &CH17 : &BBC07 : &cp;
      chan_def = &W : 86214.359375 MHz : L : 62.5 MHz : &CH18 : &BBC07 : &cp;
      chan_def = &W : 86155.765625 MHz : L : 62.5 MHz : &CH19 : &BBC07 : &cp;
      chan_def = &W : 86097.171875 MHz : L : 62.5 MHz : &CH20 : &BBC07 : &cp;
      chan_def = &W : 86038.578125 MHz : L : 62.5 MHz : &CH21 : &BBC07 : &cp;
      chan_def = &W : 85979.984375 MHz : L : 62.5 MHz : &CH22 : &BBC07 : &cp;
      chan_def = &W : 85921.390625 MHz : L : 62.5 MHz : &CH23 : &BBC07 : &cp;
      chan_def = &W : 85862.796875 MHz : L : 62.5 MHz : &CH24 : &BBC07 : &cp;
      chan_def = &W : 85804.203125 MHz : L : 62.5 MHz : &CH25 : &BBC07 : &cp;
      chan_def = &W : 85745.609375 MHz : L : 62.5 MHz : &CH26 : &BBC07 : &cp;
      chan_def = &W : 85687.015625 MHz : L : 62.5 MHz : &CH27 : &BBC07 : &cp;
      chan_def = &W : 85628.421875 MHz : L : 62.5 MHz : &CH28 : &BBC07 : &cp;
      chan_def = &W : 85569.828125 MHz : L : 62.5 MHz : &CH29 : &BBC07 : &cp;
      chan_def = &W : 85511.234375 MHz : L : 62.5 MHz : &CH30 : &BBC07 : &cp;
      chan_def = &W : 85452.640625 MHz : L : 62.5 MHz : &CH31 : &BBC07 : &cp;
      chan_def = &W : 85394.046875 MHz : L : 62.5 MHz : &CH32 : &BBC07 : &cp;
      ** datastream 2:
      ** alma-vex-defs.py -f 86271.000 -ralma -s L -n W -o 32 -b 08
      chan_def = &W : 87210.453125 MHz : L : 62.5 MHz : &CH33 : &BBC08 : &cp;
      chan_def = &W : 87151.859375 MHz : L : 62.5 MHz : &CH34 : &BBC08 : &cp;
      chan_def = &W : 87093.265625 MHz : L : 62.5 MHz : &CH35 : &BBC08 : &cp;
      chan_def = &W : 87034.671875 MHz : L : 62.5 MHz : &CH36 : &BBC08 : &cp;
      chan_def = &W : 86976.078125 MHz : L : 62.5 MHz : &CH37 : &BBC08 : &cp;
      chan_def = &W : 86917.484375 MHz : L : 62.5 MHz : &CH38 : &BBC08 : &cp;
      chan_def = &W : 86858.890625 MHz : L : 62.5 MHz : &CH39 : &BBC08 : &cp;
      chan_def = &W : 86800.296875 MHz : L : 62.5 MHz : &CH40 : &BBC08 : &cp;
      chan_def = &W : 86741.703125 MHz : L : 62.5 MHz : &CH41 : &BBC08 : &cp;
      chan_def = &W : 86683.109375 MHz : L : 62.5 MHz : &CH42 : &BBC08 : &cp;
      chan_def = &W : 86624.515625 MHz : L : 62.5 MHz : &CH43 : &BBC08 : &cp;
      chan_def = &W : 86565.921875 MHz : L : 62.5 MHz : &CH44 : &BBC08 : &cp;
      chan_def = &W : 86507.328125 MHz : L : 62.5 MHz : &CH45 : &BBC08 : &cp;
      chan_def = &W : 86448.734375 MHz : L : 62.5 MHz : &CH46 : &BBC08 : &cp;
      chan_def = &W : 86390.140625 MHz : L : 62.5 MHz : &CH47 : &BBC08 : &cp;
      chan_def = &W : 86331.546875 MHz : L : 62.5 MHz : &CH48 : &BBC08 : &cp;
      chan_def = &W : 86272.953125 MHz : L : 62.5 MHz : &CH49 : &BBC08 : &cp;
      chan_def = &W : 86214.359375 MHz : L : 62.5 MHz : &CH50 : &BBC08 : &cp;
      chan_def = &W : 86155.765625 MHz : L : 62.5 MHz : &CH51 : &BBC08 : &cp;
      chan_def = &W : 86097.171875 MHz : L : 62.5 MHz : &CH52 : &BBC08 : &cp;
      chan_def = &W : 86038.578125 MHz : L : 62.5 MHz : &CH53 : &BBC08 : &cp;
      chan_def = &W : 85979.984375 MHz : L : 62.5 MHz : &CH54 : &BBC08 : &cp;
      chan_def = &W : 85921.390625 MHz : L : 62.5 MHz : &CH55 : &BBC08 : &cp;
      chan_def = &W : 85862.796875 MHz : L : 62.5 MHz : &CH56 : &BBC08 : &cp;
      chan_def = &W : 85804.203125 MHz : L : 62.5 MHz : &CH57 : &BBC08 : &cp;
      chan_def = &W : 85745.609375 MHz : L : 62.5 MHz : &CH58 : &BBC08 : &cp;
      chan_def = &W : 85687.015625 MHz : L : 62.5 MHz : &CH59 : &BBC08 : &cp;
      chan_def = &W : 85628.421875 MHz : L : 62.5 MHz : &CH60 : &BBC08 : &cp;
      chan_def = &W : 85569.828125 MHz : L : 62.5 MHz : &CH61 : &BBC08 : &cp;
      chan_def = &W : 85511.234375 MHz : L : 62.5 MHz : &CH62 : &BBC08 : &cp;
      chan_def = &W : 85452.640625 MHz : L : 62.5 MHz : &CH63 : &BBC08 : &cp;
      chan_def = &W : 85394.046875 MHz : L : 62.5 MHz : &CH64 : &BBC08 : &cp;
      * if you are missing this line you are screwed.
      sample_rate = 125.000000 Ms/sec;

    NOEMA

    The NOEMA frequency setup for 4 Gbps x 2-pol is as in their 2022 frequency spreadsheet, screenshot below.

    Broad band mode [experimental] (16Gbps, dual pol)

    Desired tuning would yield: 85244 - 87292 USB or LSB.

    ALMA

    Same as ALMA under GMVA 4 Gbps.

    GLT

    KVN

    LMT

    MOPRA

    NOEMA

    The frequency setup is as in 2023-05_NOEMA_freq_setup_GMVA.pdf, the VEX description can be generated with noema-vex-defs.py -r 6,7 -f 91.996 --if --bbc --tracks

    Onsala (OD)

    Similar to DDC_U v126 with 64 MHz USB+LSB pairs like described farther above for PV, but more recorded channels i.e. 16 BBC x 2 sideband x 2 pol = 64 channels in VEX.

    def 85308.00MHz64x64MHz;
    * mode =  1    stations =OD
         sample_rate =   128.000 Ms/sec;  * (2bits/sample)
         *
         * VDIF Thread Id #0 - RCP
         chan_def = : 85308.00 MHz : U :  64.00 MHz : &CH01 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85308.00 MHz : L :  64.00 MHz : &CH02 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85436.00 MHz : U :  64.00 MHz : &CH03 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85436.00 MHz : L :  64.00 MHz : &CH04 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85564.00 MHz : U :  64.00 MHz : &CH05 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85564.00 MHz : L :  64.00 MHz : &CH06 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85692.00 MHz : U :  64.00 MHz : &CH07 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85692.00 MHz : L :  64.00 MHz : &CH08 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85820.00 MHz : U :  64.00 MHz : &CH09 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85820.00 MHz : L :  64.00 MHz : &CH10 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85948.00 MHz : U :  64.00 MHz : &CH11 : &BBC01 : &NoCal; *Rcp
         chan_def = : 85948.00 MHz : L :  64.00 MHz : &CH12 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86076.00 MHz : U :  64.00 MHz : &CH13 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86076.00 MHz : L :  64.00 MHz : &CH14 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86204.00 MHz : U :  64.00 MHz : &CH15 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86204.00 MHz : L :  64.00 MHz : &CH16 : &BBC01 : &NoCal; *Rcp
         * VDIF Thread Id #1 - RCP
         chan_def = : 86332.00 MHz : U :  64.00 MHz : &CH17 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86332.00 MHz : L :  64.00 MHz : &CH18 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86460.00 MHz : U :  64.00 MHz : &CH19 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86460.00 MHz : L :  64.00 MHz : &CH20 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86588.00 MHz : U :  64.00 MHz : &CH21 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86588.00 MHz : L :  64.00 MHz : &CH22 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86716.00 MHz : U :  64.00 MHz : &CH23 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86716.00 MHz : L :  64.00 MHz : &CH24 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86844.00 MHz : U :  64.00 MHz : &CH25 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86844.00 MHz : L :  64.00 MHz : &CH26 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86972.00 MHz : U :  64.00 MHz : &CH27 : &BBC01 : &NoCal; *Rcp
         chan_def = : 86972.00 MHz : L :  64.00 MHz : &CH28 : &BBC01 : &NoCal; *Rcp
         chan_def = : 87100.00 MHz : U :  64.00 MHz : &CH29 : &BBC01 : &NoCal; *Rcp
         chan_def = : 87100.00 MHz : L :  64.00 MHz : &CH30 : &BBC01 : &NoCal; *Rcp
         chan_def = : 87228.00 MHz : U :  64.00 MHz : &CH31 : &BBC01 : &NoCal; *Rcp
         chan_def = : 87228.00 MHz : L :  64.00 MHz : &CH32 : &BBC01 : &NoCal; *Rcp
         ***************************************************************************
         * VDIF Thread Id #2 - LCP
         chan_def = : 85308.00 MHz : U :  64.00 MHz : &CH33 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85308.00 MHz : L :  64.00 MHz : &CH34 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85436.00 MHz : U :  64.00 MHz : &CH35 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85436.00 MHz : L :  64.00 MHz : &CH36 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85564.00 MHz : U :  64.00 MHz : &CH37 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85564.00 MHz : L :  64.00 MHz : &CH38 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85692.00 MHz : U :  64.00 MHz : &CH39 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85692.00 MHz : L :  64.00 MHz : &CH40 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85820.00 MHz : U :  64.00 MHz : &CH41 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85820.00 MHz : L :  64.00 MHz : &CH42 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85948.00 MHz : U :  64.00 MHz : &CH43 : &BBC02 : &NoCal; *Lcp
         chan_def = : 85948.00 MHz : L :  64.00 MHz : &CH44 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86076.00 MHz : U :  64.00 MHz : &CH45 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86076.00 MHz : L :  64.00 MHz : &CH46 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86204.00 MHz : U :  64.00 MHz : &CH47 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86204.00 MHz : L :  64.00 MHz : &CH48 : &BBC02 : &NoCal; *Lcp
         * VDIF Thread Id #3 - LCP
         chan_def = : 86332.00 MHz : U :  64.00 MHz : &CH49 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86332.00 MHz : L :  64.00 MHz : &CH50 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86460.00 MHz : U :  64.00 MHz : &CH51 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86460.00 MHz : L :  64.00 MHz : &CH52 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86588.00 MHz : U :  64.00 MHz : &CH53 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86588.00 MHz : L :  64.00 MHz : &CH54 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86716.00 MHz : U :  64.00 MHz : &CH55 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86716.00 MHz : L :  64.00 MHz : &CH56 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86844.00 MHz : U :  64.00 MHz : &CH57 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86844.00 MHz : L :  64.00 MHz : &CH58 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86972.00 MHz : U :  64.00 MHz : &CH59 : &BBC02 : &NoCal; *Lcp
         chan_def = : 86972.00 MHz : L :  64.00 MHz : &CH60 : &BBC02 : &NoCal; *Lcp
         chan_def = : 87100.00 MHz : U :  64.00 MHz : &CH61 : &BBC02 : &NoCal; *Lcp
         chan_def = : 87100.00 MHz : L :  64.00 MHz : &CH62 : &BBC02 : &NoCal; *Lcp
         chan_def = : 87228.00 MHz : U :  64.00 MHz : &CH63 : &BBC02 : &NoCal; *Lcp
         chan_def = : 87228.00 MHz : L :  64.00 MHz : &CH64 : &BBC02 : &NoCal; *Lcp
    enddef;

    Polarization

    ALMA

    Linear polarized. ALMA QA2 team provides ready calibration tables to use in PolConvert.

    ATCA

    Observes in linear polarization, but data get converted on-site into a circular basis. The LBA-formatted data are thus circular. Unknown ellipticity, but probably low.

    LMT

    Linear polarized 86 GHz. Feed rotator is active during single dish calibration scans, ought to return to a reliable origin during VLBI scans.

    Mopra

    Linear polarized 86 GHz receiver. Mount is Az-El. Data must be rotated after correlation. No calibration data for PolConvert.

    Unfortunately, code plus observational issues for Mopra with a CASA PolSolve --> PolConvert approach.

    Instead, Ivan M Vidal has a QWP_ROTATE.py module and QWP_APPLY_...py script. Rotation by a constant factor, not much calibration.

    From GMVA C221 it appeas that the correct settinigs are 45 deg in a +1 sense cf. QWP_APPLY_... code.

    Pico

    Circular. Nasmyth Left probably, as hardcoded in difxio antenna_db.c, but can try VEX hoping that the hardcoded info does not override it:

    def PICOVEL;
         axis_type = nasmyth : l;
         antenna_motion = el :  30.0 deg/min : 20 sec;  * 1000.000 deg/sec/sec
         antenna_motion = az :  30.0 deg/min : 20 sec;  * 1000.000 deg/sec/sec
         axis_offset =    0.00000 m;
    enddef;

    Yebes

    Circular. Mount info for the 86 GHz receiver is Nasmyth Right since 2018.1, previously Nasmyth Left. Can specify it in VEX under DiFX 2.6.2+ via

    def YEBES40M;
         axis_type = nasmyth : r;
         antenna_motion = el :  60.0 deg/min : 20 sec;  * 1000.000 deg/sec/sec
         antenna_motion = az :  60.0 deg/min : 20 sec;  * 1000.000 deg/sec/sec
         axis_offset =    1.99600 m;
    enddef;

     

    Previous standard mode (2Gbps, PFB, dual-pol)

    This mode is deprecated. New standard mode mode is DDC @ 4Gbps (see above)

    The standard GMVA frequency setup is used for more than 90% of all observations. The data-rate is at present restricted to 2 Gbps due to limitations at the VLBA, which may get lifted in the near future.

    DBBC-PFB-Bands.png

    Other frequency setups which are listed in the VLBA table of setups (see frequency.dat of SCHED) for the 86 GHz receiver are possible though, but not all stations may be able to tune to all the LOs given in that table.

    Setup (European stations & VLBA)

    def 86380.00MHz16x32MHz;
    * mode =  1    stations =Eb:Ef:On:Mh:Ys:Pv:Gb:Nl:Pt:La:Fd:Kp:Ov:Br:Mk:Lm
         sample_rate =  64.000 Ms/sec;  * (2bits/sample)
         chan_def = : 86380.00 MHz : L :  32.00 MHz : &CH01 : &BBC01 : &L_Cal; *Rcp
         chan_def = : 86380.00 MHz : L :  32.00 MHz : &CH02 : &BBC02 : &L_Cal; *Lcp
         chan_def = : 86348.00 MHz : L :  32.00 MHz : &CH03 : &BBC03 : &L_Cal; *Rcp
         chan_def = : 86348.00 MHz : L :  32.00 MHz : &CH04 : &BBC04 : &L_Cal; *Lcp
         chan_def = : 86316.00 MHz : L :  32.00 MHz : &CH05 : &BBC05 : &L_Cal; *Rcp
         chan_def = : 86316.00 MHz : L :  32.00 MHz : &CH06 : &BBC06 : &L_Cal; *Lcp
         chan_def = : 86284.00 MHz : L :  32.00 MHz : &CH07 : &BBC07 : &L_Cal; *Rcp
         chan_def = : 86284.00 MHz : L :  32.00 MHz : &CH08 : &BBC08 : &L_Cal; *Lcp
         chan_def = : 86252.00 MHz : L :  32.00 MHz : &CH09 : &BBC09 : &L_Cal; *Rcp
         chan_def = : 86252.00 MHz : L :  32.00 MHz : &CH10 : &BBC10 : &L_Cal; *Lcp
         chan_def = : 86220.00 MHz : L :  32.00 MHz : &CH11 : &BBC11 : &L_Cal; *Rcp
         chan_def = : 86220.00 MHz : L :  32.00 MHz : &CH12 : &BBC12 : &L_Cal; *Lcp
         chan_def = : 86188.00 MHz : L :  32.00 MHz : &CH13 : &BBC13 : &L_Cal; *Rcp
         chan_def = : 86188.00 MHz : L :  32.00 MHz : &CH14 : &BBC14 : &L_Cal; *Lcp
         chan_def = : 86156.00 MHz : L :  32.00 MHz : &CH15 : &BBC15 : &L_Cal; *Rcp
         chan_def = : 86156.00 MHz : L :  32.00 MHz : &CH16 : &BBC16 : &L_Cal; *Lcp
    enddef;
    

    Setup (KVN stations)

    def 86156.00MHz8x32MHz;
    * mode =  1    stations =Ky:Ku:Kt
         sample_rate =  64.000 Ms/sec;  * (2bits/sample)
         chan_def = : 86156.00 MHz : L :  32.00 MHz : &CH01 : &BBC01 : &NoCal; *Lcp
         chan_def = : 86156.00 MHz : L :  32.00 MHz : &CH02 : &BBC02 : &NoCal; *Rcp
         chan_def = : 86156.00 MHz : U :  32.00 MHz : &CH03 : &BBC01 : &NoCal; *Lcp
         chan_def = : 86156.00 MHz : U :  32.00 MHz : &CH04 : &BBC02 : &NoCal; *Rcp
         chan_def = : 86220.00 MHz : L :  32.00 MHz : &CH05 : &BBC01 : &NoCal; *Lcp
         chan_def = : 86220.00 MHz : L :  32.00 MHz : &CH06 : &BBC02 : &NoCal; *Rcp
         chan_def = : 86220.00 MHz : U :  32.00 MHz : &CH07 : &BBC01 : &NoCal; *Lcp
         chan_def = : 86220.00 MHz : U :  32.00 MHz : &CH08 : &BBC02 : &NoCal; *Rcp
    enddef;
    

    LO=85500 MHz

    DBBC2 stations have to use the flex mode with the following channel selection in the prc-file:

    vsi1=a05,a06,a07,a08,a09,a10,a11,a12,b05,b06,b07,b08,b09,b10,b11,b12
    

    Stations which can only offer a reduced bandwidth of bitrate are considered non-standard. Setups have to be negotiated with the GMVA technical team (chair: W. Alef, MPIfR)

    All other setups are non-standard and require consultation with the GMVA scheduler or technical team (chair: W. Alef, MPIfR).

    ALMA Mode 4 Gbps (fullband mode)

    Deprecated mode. Do not use!

    The description is kept for reference only.

    For ALMA compatibilty the DBBC2 stations must observe in fullband PFB mode covering the full 512 MHz per polarisation in a single IF channel. 

    NOTE: You must use the last two core boards in the DBBC2 board stack for the fullband mode. All data from the last Core2Board (presumably IFD) will be send to VSI1 and all from last-1 (presumably IFC) to VSI2. There is no option to choose something else.

    DBBC2 setup

    Restart of the DBBC PFB control software is not required unless the DDC mode was used prior to the fullband mode.

    The only option to be commanded is

    dbbcform=full_auto
    

    FILA10G setup

    To combine the both VSI streams it is usually enough to set the Fila10G to:

    splitmode off
    inputselect vsi1-2
    vsi_samplerate 64000000
    reset keepsync
    vdif_station PV        (<-change to your station code) 
    vdif_frame 2 2 5000 ct=off
    reset keepsync
    regwrite chan_perm 0 0x21200100
    regwrite chan_perm 1 0x23220302
    regwrite chan_perm 2 0x25240504
    regwrite chan_perm 3 0x27260706
    regwrite chan_perm 4 0x29280908
    regwrite chan_perm 5 0x2B2A0B0A
    regwrite chan_perm 6 0x2D2C0D0C
    regwrite chan_perm 7 0x2F2E0F0E
    regwrite chan_perm 8 0x31301110
    regwrite chan_perm 9 0x33321312
    regwrite chan_perm 10 0x35341514
    regwrite chan_perm 11 0x37361716
    regwrite chan_perm 12 0x39381918
    regwrite chan_perm 13 0x3B3A1B1A
    regwrite chan_perm 14 0x3D3C1D1C
    regwrite chan_perm 15 0x3F3E1F1E
    reset keepsync
    timesync 
    

    Note: the last command "timesync" will only work if your FiLA10G is equipped with a GPS module/antenna. If this is not the case at your station you can do the time syncronization either:

    • manually:  timesync  <YYYY>-<MM>-<DD>T<hh>:<mm>:<ss>

    • use the FS fmset command. This must be done prior to executing the above procedure!

    IMPORTANT: Do not use FMSET to sync the FILA10G after executing the above procedure as this will partially overwrite the above setting.

     

    Note: The regwrite statements will join the two steams to a single 64 bit stream one after each other VSI1 bit 0-31 and VSI2 bit 32 to 61. The correlator expects to have alternating bits from channel 1 and 2. VSI1 bit 0+1, VSI2 bit2+3, ....

    The mode has been succesfully tested at Effelsberg (details).

    Tag page (Edit tags)
    • No tags
    Pages that link here
    Page statistics
    6838 view(s), 145 edit(s) and 41022 character(s)

    Comments

    You must login to post a comment.