View page
Talk page

Observations: EHT

This page can't be edited. | Page History
    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 15:19, 11 Jan 2022 by rottmann with version 15:24, 11 Jan 2022 by rottmann.

    ...

    • close any other running control software programs
    • close the DBBC3 client program
    • double click the icon labeled "DBBC3 Control OCT_D_OCT_D_v110.exev120.exe" "(Version number can be different)
    • answer first question with "y" in order to do a full reload of the firmware.
    • wait until the control software has fully loaded and responds with "Waiting for connection on port 4000"

    ValidateLoad the filters and validate the system

    • make sure the DBBC3 client is not running
    • start the dbbc3ctl program (on the EHT Control Computer cc-pico):
    cd /home/oper/rottmann/dbbc3/utilities
./dbbc3ctl.py dbbc3setupDBBC3_OCT_D.py dbbc3 -n 4
      After carrying out
    • do a full system check:anumber of tests and verifications the script will ask whether you want to load the

    in dbbc3ctl.py :filters. Answer with 'y'.

    check system Note: any checks prior to this question will fail if the filters have already been loaded.all

    ...

    Other changes:

    1. /body/pre[3]/@style: nothing ⇒ "margin-left: 40px;"

    Version from 15:19, 11 Jan 2022

    This revision modified by rottmann (Ban)

    ...

    • close any other running control software programs
    • close the DBBC3 client program
    • double click the icon labeled "DBBC3 Control OCT_D_v110.exe"(Version number can be different)
    • answer first question with "y" in order to do a full reload of the firmware.
    • wait until the control software has fully loaded and responds with "Waiting for connection on port 4000"

    Load the filters and validate the system

    ...

    cd /home/oper/rottmann/dbbc3/utilities
./setupDBBC3_OCT_D.py dbbc3 -n 4

    After carrying out a number of tests and verifications the script will ask whether you want to load the filters. Answer with 'y'.

    Note: any checks prior to this question will fail if the filters have already been loaded.

    ...

    Version as of 15:24, 11 Jan 2022

    This revision modified by rottmann (Ban)

    ...

    • close any other running control software programs
    • close the DBBC3 client program
    • double click the icon labeled "DBBC3 Control OCT_D_v120.exe"
    • answer first question with "y" in order to do a full reload of the firmware.
    • wait until the control software has fully loaded and responds with "Waiting for connection on port 4000"

    Validate the system

    • make sure the DBBC3 client is not running
    • start the dbbc3ctl program (on the EHT Control Computer cc-pico):
    cd /home/oper/rottmann/dbbc3/utilities
./dbbc3ctl.py dbbc3
    • do a full system check:

    in dbbc3ctl.py :

    check system all

    ...