Table of contents
Mark6 playback performance
Real correlation test (2023)
Test carried out during the 15th DiFX Users and Developers Meeting in 2023.
Setup (/Exps/TESTS/Helge/mk6speed):
- based on e22c20 (b4)
- two stations PV, SZ
- no zoom/outputbands
- modules in mark6-01 and mark6-02 (4 modules each, grouped)
- total scan duration: 120s
1. run: 38 nodes 19 threads
mk6mon peaks at 16Gbps
wallclock time: 223s
average processing rate: 8.5 Gbps
2. run: 58 nodes 19 threads
wallclock time: 192s
average processing rate 10 Gbps
3. run 58 nodes 19,threads, FFTSpecRes=0.5
wallclock time: 188s
average processing rate 10 Gbps
4. run 58 nodes 19,threads, FFTSpecRes=0.5, neuteredmpifxcorr
wallclock time: 191s
average processing rate 10 Gbps
RDMA Testing (2020)
The pure file-to-Infiniband connectivity performance can be tested with various RDMA based file transfer utilities. One compact transfer utility is https://github.com/JeffersonLab/hdrdmacp. The build needs CentOS package rdma-core-devel.
sudo yum install rdma-core-devel git clone https://github.com/JeffersonLab/hdrdmacp cd hdrdmacp; g++ -I . -g -std=c++11 -o hdrdmacp *.cc -libverbs -lz
The server that receives files can be started e.g. on fxmanager.
Need to specify a buffer set of e.g. 4 buffers (-n 4) each sized 4MB (-m 4):
./hdrdmacp -s -n 4 -m 4
Transfer speed from a FUSE-mounted 2 x 8-disk Mark6 module pair (EHT 2018, RCP slot 1&2) can be tested with e.g.
ssh oper@mark6-04 cd ~/jwagner/hdrdmacp/ fuseMk6 -r '/mnt/disks/[12]/*/band1/' /`hostname -s`_fuse/b1/12 vdifuse -a /tmp/label.cache -xm6sg -xrate=125000 -v /mark6-04_fuse/vdifuse_12/ /mnt/disks/[12]/*/band1/ ./hdrdmacp -n 4 -m 4 /mark6-04_fuse/b1/12/e18g27_Sw_117-0737.vdif fxmanager:/dev/null ./hdrdmacp -n 4 -m 4 /mark6-04_fuse/vdifuse_12/sequences/e18g27/Sw/117-0737.vdif fxmanager:/dev/null dd if=/mark6-04_fuse/b1/12/e18g27_Sw_117-0737.vdif bs=4M of=/dev/null mk6gather -o - "/mnt/disks/[12]/*/band1/e18g27_Sw_117-0737.vdif" | pv > /dev/null
Performance of RDMA from a local FUSE based file into remote /dev/null vs local /dev/null:
| Client | Server (dest.) | Rate (fuseMk6->rdmacp->dest) | Rate (vdifuse->rdmacp->dest) |
|---|---|---|---|
| mark6-04:/fuse | fxmanager:/dev/null | Transferred 308 GB in 198.8 sec (12.41 Gbps) | Transferred 308 GB in 267.4 sec (9.22 Gbps) |
| mark6-04:/fuse | mark6-04:/dev/null | Transferred 308 GB in 207.4 sec (11.89 Gbps) | Transferred 308 GB in 283.1 sec (8.71 Gbps) |
Performance of RDMA from a non-FUSE file into remote /dev/null:
| Source | Server (dest.) | Rate (file->rdmacp/dd->dest) |
|---|---|---|
| mark6-04:/data (beegfs) | fxmanager:/dev/null | rdmacp: Transferred 308 GB in 190.90 sec (12.92 Gbps) |
| io11:/data11/ (hw RAID) | fxmanager:/dev/null | rdmacp: Transferred 49 GB in 35.40 sec (11.10 Gbps) |
Performance of RDMA from FUSE into "remote" beegfs:
| Source | Server (dest.) | Rate (file->rdmacp/dd->dest) |
|---|---|---|
| mark6-04:/fuse (fuseMk6) | fxmanager:/data/rdma.vdif (beegfs) | rdmacp: Transferred 308.29 GB in 323.24 sec (7.63 Gbps) |
Plain non-RDMA performance into local /dev/null:
| Source | Method | Rate (file -> /dev/null) |
|---|---|---|
| mark6-04:/fuse (fuseMk6) | local dd copy to /dev/null | dd: 308 GB copied, 206.139 s, 1.5 GB/s (12 Gbps) |
| mark6-04 (mk6gather) | mk6gather via pv to /dev/null | mk6gather|pv: 1.50 GB/s (12 Gbps) |
| io11:/data11/ (hw RAID) | local dd copy to /dev/null | dd: 49 GB copied, 29.631 s, 1.7 GB/s (13.6 Gbps) |
Test: Swaping modules
In order to determine if the different playback speeds are due to differences in the mark6 units or tie to the data recorded on the modules two sets of modules (PV, AZ) were swapped.:
| mark6-02 | AZ: 1272 Mbps |
| mark6-03 | PV: 3669 Mbps |
Playback performance seems to be tied to the data on the module. Need to repeat the playback speed measurements with recently recorded data (e.g. from the DBBC3 recordings in the lab).
Comparison: Fuse/Gather
Mark6 files were gathered on the fly and piped trough dd:
./jwagner/kvnvdiftools/gather-stdout/gather /mnt/disks/[1234]/*/data/bf114a_Lm_142-0628.vdif - | dd of=/dev/null bs=1M count=100000
Results:
90000+10000 records in 90000+10000 records out 99921920768 bytes (100 GB) copied, 43.7195 s, 2.3 GB/s
Gathering yields much higher performance (=18 Gbps) than vdifuse (=.1.4 Gbps)
Using fuseMk6 instead of vdifuse:
fuseMk6 -r "/mnt/disks/[12]/*/data/" /home/oper/ftmp/ Found 258 scans, and 258 entries in JSON dd if=/home/oper/ftmp/c22gl_Cr_081-0000.vdif of=/dev/null bs=1M count=1000 1048576000 Bytes (1,0 GB) kopiert, 0,480969 s, 2,2 GB/s dd if=/home/oper/ftmp/w27us_Cr_086-1830.vdif of=/dev/null bs=1M count=1000 1048576000 Bytes (1,0 GB) kopiert, 0,464167 s, 2,3 GB/s dd if=/home/oper/ftmp/w27us_Cr_086-1821.vdif of=/dev/null bs=1M count=15000 15728640000 Bytes (16 GB) kopiert, 5,56799 s, 2,8 GB/s
iostat
on mark6-01 iostat finds the following:
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn sda 12.12 1767.14 0.01 486307174 4096 sdb 12.12 1767.17 0.01 486315780 4096 sdc 12.12 1767.22 0.01 486328745 4096 sdd 12.12 1767.18 0.01 486316915 4096 sde 12.12 1767.13 0.01 486305259 4096 sdf 12.12 1767.13 0.01 486304968 4096 sdg 11.94 1768.72 0.01 486741075 4096 sdh 12.12 1767.09 0.01 486292692 4096 sdi 12.12 1767.13 0.01 486304984 4096 sdj 11.93 1768.20 0.01 486597699 4096 sdk 11.93 1767.90 0.01 486516615 4096 sdl 11.95 1770.25 0.01 487163049 4096 sdm 11.93 1767.95 0.01 486530620 4096 sdn 11.93 1767.94 0.01 486527604 4096 sdo 11.93 1767.94 0.01 486526314 4096 sdp 11.93 1767.86 0.01 486506020 4096 sdr 0.00 0.02 0.01 6119 4096 sds 11.94 1767.81 0.01 486490497 4096 sdt 11.94 1767.80 0.01 486487765 4096 sdu 11.95 1769.34 0.01 486911815 4096 sdv 0.00 0.02 0.01 6117 4096 sdw 0.00 0.02 0.01 6121 4096 sdx 0.00 0.02 0.01 6119 4096 sdy 0.00 0.02 0.01 6290 4096 sdz 0.00 0.02 0.01 6116 4096 sdaa 12.07 1767.16 0.01 486313319 4096 sdab 0.00 0.02 0.01 6119 4096 sdac 0.00 0.02 0.01 6117 4096 sdad 12.06 1767.11 0.01 486298721 4096 sdae 12.06 1767.13 0.01 486304411 4096 sdaf 12.06 1767.11 0.01 486300109 4096
The io performance of some disks is much lower than expected. The following mount logic applies (red are slow devices):
Module 1: g j k l m n o p
Module2: y aa ab ac ad ae af ag
Module 3: r s t u v w x z
Module 4: a b c d e f g h i
Repeat speed measurements on Mark6 lab machines
Mark6 machines in the correlator cluster have a redhat based OS installation. In order to check whether the differences in playback speed reported by Haystack and measured in Bonn are due to OS specific differences the speed tests were repeated on Mark6 machines running the original Debian installation.
Results: Playback speed < 1Gbbps
so the OS does not seem to be the reason for the slow playback speeds.
General IO tuning
Take a look at: http://cromwell-intl.com/linux/perfo...ing/disks.html
IO scheduler should probably be set to noop on all mark6 machines
Tested setting io scheduler to NOOP on mark6-05. No measurable difference in read performance
Hyperthreading
Repeated tests with Hyperthreading enabled & disabled. no significant difference in results.
