% original TeX version by sombody
% 2002 Dec 12: LaTeX conversion by Amy Mioduszewski
% 2002 Dec 12: Minor format changes by Amy Mioduszewski and Greg Taylor
% 2002 Dec 13: Fixes by Amy in response to Richard Porcas comments
% 2002 Dec 18: More minor fixes by Amy in response to Patrick Charlot
% 2002 Dec 31: More minor changes by Amy re: Mike Garret plus improved
%              underlining
% 2003 Jan 18: More minor improvments to the underlining by Amy
% 2003 Jul 21-22: Added student info, rapid response science by Jim U.
% 2003 Aug 28: Some cleanup by Greg in response to Patrick Charlot
% 2011 Jul 07: Convert for Effelsberg LOFAR use by James M Anderson
% 2011 Jul 25: JMA: add more equipment options
% 2011 Oct 13: JMA: update for new recording computers at Effelsberg
% 2011 Nov 28: JMA: update dynamic scheduling
% 2013 Jan 10: JMA: update for lofarAN and lofarBN recording computers
% 2013 Jan 11: JMA: add copying time request
% 2013 Jan 14: JMA: fix copying time stuff
%
% This is the Effelsberg LOFAR proposal cover sheet.  It is highly recommended 
% that you make a copy of this before editing.
% Lines beginning with ``%'' give instructions as to what to fill in
% or replace on immediately following lines.
%
% COVER SHEET, FRONT SIDE
%

\documentclass[10pt]{article}
\paperheight = 8.27truein
\paperwidth = 11.69truein
\newcommand{\unter}[1]{\hbox to #1{\hrulefill}}
\newcommand{\YES}{\ensuremath{\bigotimes}\ }
\newcommand{\NO}{\ensuremath{\bigcirc}\ }
\newcommand{\yes}{\ensuremath{\bigotimes}\ }
\newcommand{\no}{\ensuremath{\bigcirc}\ }
\newcommand{\station}{GLOW}\newcommand{\stationemail}{lofar-obs@mpifr-bonn.mpg.de}\newcommand{\deadline}{When we get around to it}
\def\arcmin{$^\prime$}
\def\arcsec{$^{\prime\prime}$}
\voffset=-1.3truein
\hoffset=-0.7truein
\textwidth = 7.45truein
\textheight = 10.6truein
\newcounter{propsec}
\renewcommand{\thepropsec}{\stepcounter{propsec}\textbf{(\arabic{propsec})}}
\newcommand{\usethepropsec}{\textbf{(\arabic{propsec})}}



%
% Remove the double percent sign at the beginning of one of the
% lines below.  
%
%% \renewcommand{\station}{EFFELSBERG}\renewcommand{\stationemail}{lofar-obs@mpifr-bonn.mpg.de}\renewcommand{\deadline}{When we get around to it}
%% \renewcommand{\station}{GLOW}\renewcommand{\stationemail}{lofar-obs@unknown.de}\renewcommand{\deadline}{When we get around to it}
%% \renewcommand{\station}{J\"ULICH}\renewcommand{\stationemail}{lofar-net@astro.rub.de}\renewcommand{\deadline}{When we get around to it}
%% \renewcommand{\station}{POTSDAM-BORNIM}\renewcommand{\stationemail}{gmann@aip.de}\renewcommand{\deadline}{When we get around to it}
%% \renewcommand{\station}{TAUTENBURG}\renewcommand{\stationemail}{hoeft@tls-tautenburg.de}\renewcommand{\deadline}{When we get around to it}
%% \renewcommand{\station}{UNTERWEILENBACH}\renewcommand{\stationemail}{lofar-obs@mpa-garching.mpg.de}\renewcommand{\deadline}{When we get around to it}
%% \renewcommand{\station}{UNKNOWN INSTRUMENT}\renewcommand{\stationemail}{unknown@unknown.de}\renewcommand{\deadline}{When we get around to it}







\begin{document}


\parindent 0pt
\moveleft 1.8in
\vbox{ 
\centerline{\bf
\station\ LOFAR PROPOSAL COVERSHEET}
}
\vskip -0.2in
\moveright 4.87in
\vbox{
\fbox{\rule[-0.75in]{0in}{0.2in}
\begin{tabular}{p{1.5in}}
\vskip 0.5in
\vskip 0.2in
rcvd: \\
\end{tabular}
}}

\vskip -0.75truein
\moveleft 0.3in
\vbox{
DEADLINES: \deadline
%1st of Feb., June, Oct.

% If you are requesting antennas from more than one GLOW LOFAR
% station, or are requesting the Effelsberg 100 m telescope together
% with a LOFAR station, or are expecting to correlate on the MPI
% correlator at Bonn or EVN correlator at JIVE , remove the double
% percent sign from the following lines (and do as it says).

%% EMAIL TO: lofar-obs@mpifr-bonn.mpg.de\\
%% OR MAIL TO: GLOW Scheduler, MPIfR, Auf dem Hugel 69, D-53121 Bonn, Germany
}
\bigskip
\moveleft 0.7in
\vbox{
\thepropsec\ Date Prepared:
%{\bf (1)} Date Prepared:

\vskip -11pt
\moveleft -1.2in
\vbox{
% If you want to add a manual date replace the \today (below) with a date.
%\today
}}
\medskip
\moveleft 0.7in
\vbox{
\thepropsec\ Title of Proposal:
%% enter first line of title on next line

\mbox{}\\\parskip -12pt\hskip 0.05in
%% enter second line of title on next line (if necessary)

}   
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% If any of the authors has moved or is a first time user, please add a sheet
% at the end of the Scientific Justification with their full address including
% electronic mail, fax and phone number.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\moveleft 0.75truein
\vbox{
\begin{tabular}{|p{1.6truein}|p{1.4truein}|p{2.25truein}|p{0.28truein}|p{0.47truein}|p{0.45truein}|}
\hline
&&&\multicolumn{3}{c|}{\underbar{Students Only}} \\
\thepropsec\ AUTHORS&\hfil INSTITUTION\hfil&\hfil E-mail\hfil&G/U&\hfil For\hfil&\hfil Ph.D.\hfil\\
(Add * for new location)&&&&Thesis?&\hfil Year\hfil \\
\hline
\parskip -12pt

%% enter first author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.

&\parskip -12pt
%% enter first author institution on blank line below (abbreviate to less
%% than 27 characters)

&\parskip -12pt

%% enter first author e-mail on next line

&\parskip -12pt

%% If first author is student, enter "G" for graduate student or "U" for
%% undergraduate student on the next blank line.  If first author
%% isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If first author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If first author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If first author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\parskip -12pt

%% enter second author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.

&\parskip -12pt

%% enter second author institution on blank line below (abbreviate to less
%% than 27 characters)

&\parskip -12pt

%% enter second author e-mail on next line

&\parskip -12pt

%% If second author is student, enter "G" for graduate student or "U" for
%% undergraduate student.  If second author isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If second author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If second author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If second author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\parskip -12pt

%% enter third author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.

&\parskip -12pt

%% enter third author institution on blank line below (abbreviate to less
%% than 27 characters)

&\parskip -12pt

%% enter third author e-mail on next line

&\parskip -12pt

%% If third author is student, enter "G" for graduate student or "U" for
%% undergraduate student.  If third author isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If third author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If third author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If third author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\parskip -12pt

%% enter fourth author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.


&\parskip -12pt

%% enter fourth author institution on blank line below (abbreviate to less
%% than 27 characters)


&\parskip -12pt

%% enter fourth author e-mail on next line


&\parskip -12pt

%% If fourth author is student, enter "G" for graduate student or "U" for
%% undergraduate student.  If fourth author isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If fourth author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If fourth author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If fourth author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\parskip -12pt

%% enter fifth author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.


&\parskip -12pt

%% enter fifth author institution on blank line below (abbreviate to less
%% than 27 characters)


&\parskip -12pt

%% enter fifth author e-mail on next line


&\parskip -12pt

%% If fifth author is student, enter "G" for graduate student or "U" for
%% undergraduate student.  If fifth author isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If fifth author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If fifth author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If fifth author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\parskip -12pt

%% enter sixth author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.


&\parskip -12pt

%% enter sixth author institution on blank line below (abbreviate to less
%% than 27 characters)


&\parskip -12pt

%% enter sixth author e-mail on next line


&\parskip -12pt

%% If sixth author is student, enter "G" for graduate student or "U" for
%% undergraduate student.  If sixth author isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If sixth author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If sixth author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If sixth author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\parskip -12pt

%% enter seventh author name on next blank line.  If this is the
%% author's first proposal for the specified GLOW station, or the
%% affiliation has changed since the last proposal, please put a *
%% after the name.

&\parskip -12pt

%% enter seventh author institution on blank line below (abbreviate to less
%% than 27 characters)

&\parskip -12pt

%% enter seventh author e-mail on next line

&\parskip -12pt

%% If seventh author is student, enter "G" for graduate student or "U" for
%% undergraduate student.  If seventh author isn't a student, leave blank.
%% Students at institutions outside the U.S. may not have the same
%% distinction between graduate and undergraduate studies that is followed
%% in the U.S. In such cases, just enter "G".


&\parskip -12pt

%% If seventh author is a grad student, is this observation for his/her Ph.D.
%% thesis?  Enter "Yes" or "No".  If seventh author is not a graduate
%% student, leave blank.


&\parskip -12pt

%% If seventh author is a graduate student, enter the Ph.D. year, whether
%% or not this observation is for the Ph.D. thesis.


\\
\hline
\end{tabular}
}
\medskip
\moveleft 0.7in
\vbox{
\thepropsec\ Related previous or current GLOW proposal(s):
%% enter related GLOW proposal numbers inside the curly braces on next line 
{}
%% If this is a resubmission of a proposal change \NO to \YES below
\hfill\NO Resubmission
}
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Contact author for scheduling:
\makebox[2in][l]{
%% enter contact author's name on next line

}
\thepropsec\ Telephone:
%% enter contact author's telephone number on next line



\makebox[0.75in][r]{Address:}
\makebox[3.797in][l]{
%% enter first line of contact author's address on next line

}
\makebox[0.5in][r]{Fax:}
\makebox[2in][l]{
%% enter contact author's Fax number on next line

}
\hspace{0.75in}\makebox[4in][l]{
%% enter second line of contact author's address on next line

}
\hspace{0.75in}\makebox[4in][l]{
%% enter third line of contact author's address on next line

}
\hspace{0.75in}\makebox[4in][l]{
%% enter fourth line of contact author's address on next line

}
}
\medskip
\moveleft 0.7in
\vbox{
\thepropsec\ Scientific Category:\hspace{0.25cm}%
%
%% on the next few lines find the category that best applies to your
%% project and replace ``\NO'' with ``\YES'' on that line
%
\NO astrometry\hspace{0.25cm}
\NO cosmic rays\hspace{0.25cm}
\NO cosmology\hspace{0.25cm}
\NO extragalactic\hspace{0.25cm}
\NO Galactic\hspace{0.25cm}
\NO ionosphere

\mbox{}\phantom{{\usethepropsec} Scientific Category:\hspace{0.25cm}}%
\NO pulsars\hspace{0.25cm}
\NO Solar system\hspace{0.25cm}
\NO test:\hspace{0.25cm}
\NO other:
%% if you replaced \NO on the previous line (next to "other"), or if
%% you replace \NO on the line for test, give a short
%% description (a couple of words maximum) of the type of observation
%% on the next line

}
\smallskip

\moveleft 0.7truein
\vbox{
  %% The next few lines apply ONLY to GLOW LOFAR proposals for Rapid
  %% Response Science.  
\mbox{}\phantom{\usethepropsec} Rapid Response Science:\hspace{0.25cm}\parskip -12pt
%
%% on the next few lines find the category that applies to your
%% project and replace ``NO'' with ``YES'' on that line
%
\NO Known Transient\hspace{0.25cm}
\NO Exploratory\hspace{0.25cm}
\NO Target of Opportunity\hspace{0.25cm}\parskip -10pt

}
\medskip
\moveleft 0.7in
\vbox{
\thepropsec\ Frequency RCUMODE(s): band(s) requested:\hspace{0.25cm}%
%
%
% on the next few lines find the wavelengths being requested and 
% replace the ``NO'' or ``SOME'' with ``YES'' on that line
\NO 3: 10--80 MHz\hspace{0.25cm}
\NO 4: 30--80 MHz\hspace{0.25cm}
\NO 5: 110--190 MHz\hspace{0.25cm}

\mbox{}\phantom{\usethepropsec\ }%
\NO 6: 170--230 MHz\hspace{0.25cm}
\NO 7: 210--260 MHz\hspace{0.25cm}
% if frequencies other than LOFAR standard setups are being requested, 
% replace the ``NO'' with ``YES'' on the line below, and
% enter the band(s) requested on the following blank line
\NO Special frequency setup: \makebox[2.795in][l]{\hrulefill

\hrulefill}

%
}
\medskip
\moveleft 0.7in
\vbox{
\thepropsec\ Observing mode:
% Select all that apply
\NO Intra-station Interferometry\hspace{0.25cm}
\NO Inter-station Interferometry\hspace{0.25cm}
\NO Transient Buffer Boards\hspace{0.25cm}

\mbox{}\phantom{\usethepropsec}
\NO Time-integrated Beamforming\hspace{0.25cm}
\NO Beamforming for Pulsars\hspace{0.25cm}
\NO Piggybacking without Control\hspace{0.25cm}

\mbox{}\phantom{\usethepropsec}
\NO Piggybacking with Station Control\hspace{0.25cm}
\NO Data Processing (No Use of Station)\hspace{0.25cm}

\mbox{}\phantom{\usethepropsec}
\NO Other:\makebox[6.566in][l]{\hrulefill
%% if you replaced \NO on the previous line (next to "other"), give a short
%% description (a couple of words maximum) of the observation mode
%% on the next line

\hrulefill}
}
\medskip
\moveleft 0.7in
\vbox{
\thepropsec\hspace{0.25cm}
% If this proposal requests multiple epochs, change the ``NO'' to ``YES''
% on the line below
%
\NO Multi-epoch observation:\hspace{0.6cm}
%
\makebox[0.4in][c]{\hrulefill
% If multi-epoch, enter the number of epochs requested with this
% proposal on the line below

\hrulefill}
epochs of \makebox[0.5in][c]{\hrulefill
% enter number of hours requested per epoch on the line below

\hrulefill}
hours each, separated by \makebox[1.835in][c]{\hrulefill
% enter the separation between epochs on the next blank line below.  Include
% units - eg ``4 months'' or ``2 days''

\hrulefill}

\mbox{}\phantom{\usethepropsec}\hspace{0.25cm}
% If this proposal requests multiple post-processing epochs, 
% change the ``NO'' to ``YES''  on the line below
%
\NO Multi-epoch post-processing:
%
\makebox[0.4in][c]{\hrulefill
% If multi-epoch, enter the number of epochs requested with this
% proposal on the line below

\hrulefill}
epochs of \makebox[0.5in][c]{\hrulefill
% enter number of hours requested per epoch on the line below

\hrulefill}
hours each, separated by \makebox[1.835in][c]{\hrulefill
% enter the separation between epochs on the next blank line below.  Include
% units - eg ``4 months'' or ``2 days''

\hrulefill}

\mbox{}\phantom{\usethepropsec}\hspace{0.25cm}
% If this proposal requests multiple post-processing epochs, 
% change the ``NO'' to ``YES''  on the line below
%
\NO Multi-epoch data copying:\hspace{0.375cm}
%
\makebox[0.4in][c]{\hrulefill
% If multi-epoch, enter the number of epochs requested with this
% proposal on the line below

\hrulefill}
epochs of \makebox[0.5in][c]{\hrulefill
% enter number of hours requested per epoch on the line below

\hrulefill}
hours each, separated by \makebox[1.835in][c]{\hrulefill
% enter the separation between epochs on the next blank line below.  Include
% units - eg ``4 months'' or ``2 days''

\hrulefill}


}
%\vskip -10pt \hskip 2.2in \rule{0.50in}{0.5pt} \hskip 0.80in \rule{0.50in}{0.5pt} \hskip 1.70in \rule{1.00in}{0.5pt}
\medskip
\moveleft 0.7in
\vbox{
\begin{tabular}{|p{1.7truein}|p{1.155truein}|p{0.49truein}|p{0.95truein}|p{0.95truein}|p{1.15truein}|}
\hline
\thepropsec\ Experiment mode&\hfil Requested stations\hfil&\hfil
Number\hfil&\hfil Observing time\hfil&\hfil Processing time\hfil &\hfil Data-copying time\hfil \\
&&\hfil at once\hfil&\hfil requested [hr]\hfil&\hfil requested [hr]\hfil&\hfil requested [hr]\hfil \\
\hline
Individual station &
% REQUESTED STATIONS
%
% Individual station use indicates that you intend to only use a
% single station at any given time.  If you specify more than one
% station, it is presumed that you do not care which station is used
% for any given epoch.
%
% List stations requested from GLOW on the next blank line.
% Specify using the 2-letter station codes as given below, or say ALL
%     Ef Effelsberg
%     Ju Juelich
%     Po Potsdam-Bornim
%     Tb Tautenburg
%     Uw Unterweilenbach
% Note: IVS codes at ftp://ivscc.gsfc.nasa.gov/pub/control/ns-codes.txt

& 
% If you have requested using a single individual station, enter 1 on
% the line below

&
% On the line below, list the total observing time requested of this GLOW station

&
% On the line below, list the total post-processing time requested for
% this observation

&
% On the line below, list the total data-copying time requested for
% this observation

\\
\hline
Multiple independent stations&
%
% Multiple independent stations indicates that you intend to use
% multiple stations simultaneously, but that datastreams from each
% individual station will be processed independently.  For example,
% you can observe a frequency spectrum of the Sun from 30--80 MHz with
% one station, and from 110--160 MHz with a different station.
%
% On the next blank line, list the requested GLOW stations for this mode.

&
% On the line below, list the number of GLOW stations you desire to
% use simultaneously

&
% On the next blank line, list the total observing time per station requested of
% GLOW stations 

&
% On the line below, list the total post-processing time requested for
% this observation

&
% On the line below, list the total data-copying time requested for
% this observation

\\
\hline
GLOW Interferometry&
%
% List stations requested from GLOW on the next blank line
% (ALL may be specified)

&
% On the line below, list the number of GLOW stations you desire to
% use simultaneously

&
% On the line below, list the total time observing requested of GLOW stations

&
% On the line below, list the total post-processing time requested for
% this observation

&
% On the line below, list the total data-copying time requested for
% this observation

\\
\hline
Non-GLOW Instruments&

% On the next blank line, list coordinated simultaneous or
% quasi-simultaneous observations required on other instruments -
% especially Effelsberg 100 m observations for simultaneous higher
% frequency observations or simultaneous polarization calibration or
% pulsar phase determination.  
%
% Note that separate proposals for other instruments must be
% submitted to those instruments.  This proposal will not be forwarded
% to other telescopes.  The information will be provided to the TAC
% for reference, and to the scheduler for coordination of actual
% scheduling.  

&&
% On the next blank line, list the total observing time requested of
% these instruments.  If observing time has already been awarded on
% these other instruments, please indicate this with the word
% ``awarded'' following the allocated time value.


&
% On the line below, list the total post-processing time requested for
% this observation.  If processing time has already been awarded on
% these other resources, please indicate this with the word
% ``awarded'' following the allocated time value.

&
% On the line below, list the total data-copying time requested for
% this observation

\\
\hline
ILT Observations&

% This category is to be used to indicate project proposals being made
% to, or already awared time from, the International LOFAR telescope
% that require additional resources from GLOW single station equipment
% or observing time.  This area is to be used to indicate resources
% intended to be obtained from the ILT.  In the areas above, mark the
% additional resources being requested from GLOW.

% On the next blank line, list the ILT antennas requested 

&
% On the line below, list the number of ILT stations you desire to
% use simultaneously

&
% On the next blank line, list the total observing time time per
% station requested of ILT stations.  If observing time has already
% been awarded on ILT stations, please indicate this with
% the word ``awarded'' following the allocated time value.

&
% On the line below, list the total post-processing time requested for
% this observation.  If processing time has already been awarded on
% ILT resources, please indicate this with the word
% ``awarded'' following the allocated time value.

&
% On the line below, list the total data-copying time requested for
% this observation

\\
\hline
\end{tabular}
}
\medskip
\moveleft 0.75truein
\vbox{
\begin{tabular}{p{7.0truein}}
\thepropsec\ ABSTRACT (Do not write outside this space. Please type)\\
\vskip 1.7in
\hrule width 7.0in \\
Scheduler use only\\
\parskip -12pt
% PROPOSAL COVERSHEET VERSION
(2013 Jan 14)\\
\vskip -2.3in

% give a short description (abstract) of 150 words or less of your
% proposed observation and what you want to accomplish on the
% following lines


% END OF INPUT FOR SIDE 1
\end{tabular}
}
\clearpage

% START PAGE 2

\moveleft 0.7truein
\vbox{
\thepropsec\ Observation type:\hspace{0.25cm} 
%
% On the lines below, replace the ``NO'' with ``YES'' for all that
% apply
%
\NO Interferometry\hspace{0.25cm}
\NO Spectroscopy\hspace{0.25cm}
\NO Pulsar\hspace{0.25cm}
\NO Polarization

}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Polarization:\hspace{0.25cm}
%
% Indicate the polarization to be recorded by replacing the ``NO'' with
% ``YES'' on one of the lines below.
%
\NO Total power only\hspace{0.25cm}
\NO Full linear polarization

}
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Proposal should be\hspace{0.25cm}
%
% If the proposal is suitable for dynamic scheduling (that is, the 
% observer will supply an observe file in GST which will be executed
% when the status of the array and weather is satisfactory, and the
% observer may not be notified until after the observation has taken
% place) change the ``NO'' to ``YES'' on the line below. 
%
\NO Dynamically scheduled

\mbox{}\phantom{\usethepropsec\ Proposal should be}\hspace{0.25cm}
%
% if the proposal is unsuitable for dynamic scheduling (perhaps
% needing coordination with some other instrument or requiring a fixed
% date of observation known to the observer in advance, change the
% ``NO'' to ``YES'' on the line below, and if the reason is not one of
% the above, indicate what it is in the body of the proposal.
%
\NO Scheduled by the observatory


\mbox{}\phantom{\usethepropsec\ Proposal should be}\hspace{0.25cm}
%
% if the proposal needs to be scheduled for a specified date range,
% because of astronomical reasons or because of existing time
% allocations for other instruments for a simultaneous campaign,
% change the ``NO'' to ``YES'' on the line below, and indicate what
% the reasons for this are in the body of the proposal.
%
\NO Scheduled according to the exact dates below
%
for fixed scheduling.

}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Simultaneous piggybacking observations:\hspace{0.25cm}
%
% On the lines below, replace the ``NO'' with ``YES'' for the one that
% best fits.  If piggybacking observations are not at all possible,
% this should be justified in the proposal.
%
\NO taking control MAY be performed\hspace{0.25cm}

\mbox{}\phantom{\usethepropsec}
\NO without control MAY be performed\hspace{0.25cm}
\NO may NOT be performed\hspace{0.25cm}
\NO this is a piggybacking proposal\hspace{0.25cm}

}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Processing location(s):\hspace{0.25cm}
%
% Change ``NO'' to ``YES'' on the appropriate line below to specify the 
% desired correlator.
%
\NO Bn\hspace{0.25cm} % Bonn MPIfR
\NO Ef\hspace{0.25cm} % Effelsberg MPIfR
\NO Ju\hspace{0.25cm} % Juelich
\NO Po\hspace{0.25cm} % Potsdam
\NO Tb\hspace{0.25cm} % Tautenburg
\NO Other:
%
% If ``Other'' is specified, please enter the processing location name on
% the next line.

}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Disk usage [TB]:
Raw station data:
\makebox[0.75in][c]{\hrulefill
% In the area below, enter the total disk usage for temporary storage
% of raw station data required, in units of TB

\hrulefill}\hspace{0.25cm}
Processed data:
\makebox[0.75in][c]{\hrulefill
% In the area below, enter the total disk usage for temporary storage
% of processed data required, such as for temporary processing files,
% interferometry visibility data, and so on, in units of TB

\hrulefill}\hspace{0.25cm}
Archived data:
\makebox[0.75in][c]{\hrulefill
% In the area below, enter the total disk usage for data that should
% be archived when your processed time allocation is finished, in
% units of TB 

\hrulefill}
}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Number of computers requested for:
Recording:
\makebox[0.5in][c]{\hrulefill
% In the area below, enter the total disk usage for temporary storage
% of raw station data required, in units of TB

\hrulefill}\hspace{0.25cm}
Processing:
\makebox[0.5in][c]{\hrulefill
% In the area below, enter the total disk usage for temporary storage
% of processed data required, such as for temporary processing files,
% interferometry visibility data, and so on, in units of TB

\hrulefill}\hspace{0.25cm}
Archiving:
\makebox[0.5in][c]{\hrulefill
% In the area below, enter the total disk usage for data that should
% be archived when your processed time allocation is finished, in
% units of TB 

\hrulefill}
}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Recording/Processing Computers:  Comments:
\makebox[4.038in][l]{
%
% Enter comments on the computers to be used here

\hrulefill}

\hspace{0.5in}\makebox[1.0in][l]{lofarAN:}
%
\NO All\hspace{0.25cm}
\NO \makebox[0.75in][l]{Any}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarA1}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarA2}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarA3}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarA4}

\hspace{0.5in}\makebox[1.0in][l]{lofarBN:}
%
\NO All\hspace{0.25cm}
\NO \makebox[0.75in][l]{Any}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarB1}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarB2}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarB3}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarB4}

\hspace{0.5in}\makebox[1.0in][l]{storage:}
%
\NO All\hspace{0.25cm}
\NO \makebox[0.75in][l]{Any}\hspace{0.25cm}
\NO \makebox[0.5in][l]{lofarsrv}
}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Raw averaging time [s]:
\makebox[0.75in][c]{\hrulefill
%
% Enter raw averaging time in seconds on the next blank line.
% If no averaging is being done, give the raw time resolution of the
% time series data being recorded.

\hrulefill} 
%
Raw spectral resolution [kHz]:
\makebox[0.75in][c]{\hrulefill
%
% Enter raw spectral resolution in kHz to be produced

\hrulefill}
}
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Recording software required:
\makebox[5.11in][l]{
%
% Enter the software to be used for raw processing of the station
% data, including correlation if performed

\hrulefill}}
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Postprocessing software required:
\makebox[4.83in][l]{
%
% Enter the software to be used for post-processing of the data

\hrulefill}}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Assistance required:

\hspace{0.5in}\makebox[1.5in][l]{Observation Setup:}
%
% If assistance is needed for observation preparation and setup, replace
% ``NO'' with ``YES'' on the appropriate line below
\NO Consultation\hspace{0.25cm}
\NO Extensive help\hspace{0.25cm}
\NO Observe file preparation

\hspace{0.5in}\makebox[1.5in][l]{Postprocessing:}
% If assistance is needed for postprocessing, replace
% ``NO'' with ``YES'' on the appropriate line below
%
\NO Consultation\hspace{0.25cm}
\NO Extensive help\hspace{0.25cm}
\NO Calibration service
}
%
\medskip
\moveleft 0.7truein
\vbox{
\thepropsec\ Source list:
If more than 4 sources, please attach list.
If more than 30, give only selection criteria and LST range(s)
}
\medskip
\moveleft 0.7truein
\vbox{
\begin{tabular}{|p{1.85truein}|p{1.15truein}|p{1.15truein}|p{1.15truein}|p{1.15truein}|}
\hline
&\hfil Source 1 \hfil & \hfil Source 2 \hfil &\hfil Source 3 \hfil &\hfil Source 4 \hfil \\
\hline
Name(s) &\parskip -12pt
% On the following blank line, enter the name of the first source

&\parskip -12pt
% On the following blank line, enter the name of the second source

&\parskip -12pt
% On the following blank line, enter the name of the third source

&\parskip -12pt
% On the following blank line, enter the name of the fourth source

\\ \hline
RA J2000 (hh mm)&\parskip -12pt
% on the following blank line, enter the right ascension of the first source

&\parskip -12pt
% on the following blank line, enter the right ascension of the second source

&\parskip -12pt
% on the following blank line, enter the right ascension of the third source

&\parskip -12pt
% on the following blank line, enter the right ascension of the fourth source

\\ \hline
Dec J2000 (dd.d)&\parskip -12pt
% on the following blank line, enter the declination of the first source

&\parskip -12pt
% on the following blank line, enter the declination of the second source

&\parskip -12pt
% on the following blank line, enter the declination of the third source

&\parskip -12pt
% on the following blank line, enter the declination of the fourth source

\\ \hline
Effelsberg LST range (GLOW)&\parskip -12pt
% on the following blank line, requested GLOW LST range, 1st source

&\parskip -12pt
% on the following blank line, requested GLOW LST range, 2st source

&\parskip -12pt
% on the following blank line, requested GLOW LST range, 3st source

&\parskip -12pt
% on the following blank line, requested GLOW LST range, 4st source

\\ \hline
Effelsberg LST range (Other) &\parskip -12pt
% on the following blank line, requested LST range, 1st source, other antennas

&\parskip -12pt
% on the following blank line, requested LST range, 2st source, other antennas

&\parskip -12pt
% on the following blank line, requested LST range, 3st source, other antennas

&\parskip -12pt
% on the following blank line, requested LST range, 4st source, other antennas

\\ \hline
RCUMODE(s) &\parskip -12pt
% on the following blank line, enter the band(s) at which the first source
% is to be observed

&\parskip -12pt
% on the following blank line, enter the band(s) at which the second source
% is to be observed

&\parskip -12pt
% on the following blank line, enter the band(s) at which the third source
% is to be observed

&\parskip -12pt
% on the following blank line, enter the band(s) at which the fourth source
% is to be observed

\\ \hline
Flux density (Total, Jy) &\parskip -12pt
% on the following blank line, enter total flux density of the first source

&\parskip -12pt
% on the following blank line, enter total flux density of the second source

&\parskip -12pt
% on the following blank line, enter total flux density of the third source

&\parskip -12pt
% on the following blank line, enter total flux density of the fourth source

\\ \hline
Flux density (correlated, mJy) &\parskip -12pt
% on the next blank line, enter expected correlated flux density of the 
% first source

&\parskip -12pt
% on the next blank line, enter expected correlated flux density of the 
% second source

&\parskip -12pt
% on the next blank line, enter expected correlated flux density of the 
% third source

&\parskip -12pt
% on the next blank line, enter expected correlated flux density of the 
% fourth source

\\ \hline
RMS needed (mJy/beam) &\parskip -12pt
% on the following blank line, enter needed RMS (mJy/beam), 1st source

&\parskip -12pt
% on the following blank line, enter needed RMS (mJy/beam), 2nd source

&\parskip -12pt
% on the following blank line, enter needed RMS (mJy/beam), 3rd source

&\parskip -12pt
% on the following blank line, enter needed RMS (mJy/beam), 4th source

\\ \hline
Peak/RMS needed &\parskip -12pt
% on the following blank line, enter needed Peak/RMS needed, 1st source

&\parskip -12pt
% on the following blank line, enter needed Peak/RMS needed, 2nd source

&\parskip -12pt
% on the following blank line, enter needed Peak/RMS needed, 3rd source

&\parskip -12pt
% on the following blank line, enter needed Peak/RMS needed, 4th source

\\ \hline
\end{tabular}}
\smallskip
\moveleft 0.75truein
\vbox{
\begin{tabular}{p{7.0truein}}

% At this point, if you are giving selection criteria instead of a
% source list, you may insert a three line summary of the criteria.

\parskip -12pt \\
\end{tabular}}
\medskip
\moveleft 0.75truein
\vbox{
\thepropsec\ Preferred GLOW session or range of dates for scheduling, and why:\\
% On the following line, enter preferred date or session

}
\medskip
\moveleft 0.75truein
\vbox{
\thepropsec\ Dates which are NOT acceptable, and why:\\
% On the following line, enter dates which are not acceptable

}
% END OF INPUT FOR GLOW COVERSHEET, SIDE 2.

\medskip
\moveleft 0.75truein
\vbox{
\thepropsec\ Attach a self-contained scientific
justification, not in excess of 1000 words.\\
Preprints or reprints will not be forwarded to the referees.
}
\vskip 0.75in
\moveleft 0.75truein
\vbox{
Information about the capabilities of GLOW LOFAR stations may be 
found on the World Wide Web by starting at ???\\

Please include the full postal addresses for first-time
users or for those that have moved (if not contact author).\\

Please submit a hardcopy form of your proposal to the people behind \stationemail.
}
\clearpage

\textheight 9.3in
\hsize=6.5in
\columnwidth=6.5in
%\pagestyle{plain}
\voffset=-0.7in
\hoffset=-0.8in
\vsize=8.9in
\parindent 20pt
\normalsize

%% TYPE YOUR SCIENTIFIC JUSTIFICATION BEGINNING ON THE NEXT LINE.
%% DO NOT EXCEED 1000 WORDS.  EXCESS TEXT MAY CAUSE YOUR PROPOSAL
%% TO BE DOWNGRADED.

\end{document}
